Jump to content

2006 CP Mustang for sale


Recommended Posts

CP Mustang 2006

$19500 OBO

I’ve owned this car for 12 years and the time has come to move on. The car has been meticulously maintained. It is in very good condition overall, with some cosmetic damage to the front and rear bumper covers. It also has some very slight cone dents in the driver and passenger doors that can be seen from some angles. Paint is good with some slight pitting behind the wheels.

This car is fast and very reliable (I know that’s odd for a CP car). The only thing this car needs is new tires; the ones on the car have 136 runs on them. At less than 2900 lbs. it’s actually easy on tires. The car is well sorted and very easy to drive at the limit. It’s been in the trophies at every National event it’s been entered in since 2012 between ESP and CP with a few wins in that period. The car has just less than 52000 miles. Zero rust

Suspension

AST 4100 shocks and struts, freshly rebuilt by PSI in 2020. Dyno charts available.

Three front sway bars, Stock with extra holes drilled for adjustment (on the car now), a Strano bar and a bar from a V6 Mustang with UMI adjustable end links. For the rear we’re using a Strano bar.

Maximum Motorsports bump steer kit

Fays2 Watts link

Tubular lower control arms (rear) Steeda upper control arm with adjustable pinion angle, all with spherical bearings throughout.

Drivetrain

The car makes 371 WHP and 345 ft. lbs. Torque on VP C85                                                                                                                                        

JBA long tube headers with Burns lightweight serviceable mufflers

Odyssy PC680 battery

Ford Racing intake manifold and throttle body

Underdrive pulleys

Torsen T2R differential with Ford Racing one piece aluminum drive shaft

Exedy flywheel with ACT clutch

Steeda motor mounts

Custom transmission and differential breather vents (to prevent oil mist under the car)

Completely resealed transmission and new rear main seal

 

 

Fuel System

39 lbs injectors

All fuel lines PTFE lined braided steel

4 gallon fuel cell with Radium surge tank with AEM E85 high flow fuel pump, Holley lift pump

Canton serviceable E85 compatible fuel filter

SCT tuner with multiple tunes for E85 and gas

Wheels and brakes

Wilwood Super light brakes with two piece rotors front and rear, six piston front, four piston rear calipers. Over 30 lbs. unsprung weight savings.

CCW 18x11.5 wheels with 315/30/18 Hoosier A7’s (need replaced badly)

Enkei PF01 18X10.5 wheels with Hoosier Rain tires mounted 305/30/18. One run on the rain tires but they are pretty old. They have always been stored inside and bagged and surprisingly still feel pretty soft.

ARP wheel spacers

Aero

Custom 10” spoiler

Custom splitter made from Alumalite

Lightweight tubular front bumper

Interior

Corbeau seats

Sparco steering wheel

 

Contact info

Tim Bergstrom

Email- t.bergs@hotmail.com

602-369-6936

Call, text or voicemail

(edited)_2021_Nationals_CP.webp

PB070013.JPG

PB070006 (2) - Copy.JPG

PB070008 (2).JPG

PB070023 (2).JPG

PB070020.JPG

PB070005 (2).JPG

PB070038.JPG

PB070043.JPG

PB070039.JPG

PB070055.JPG

PB070018.JPG

PB070029.JPG

PB070042.JPG

PB070046.JPG

PB070045.JPG

PB070066.JPG

  • Like 1
Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...